Illuminating your outdoor space can be tricky. How many lights do you need? Where do you place them to get the best lighting during the evening? Where and what are the best aspects to highlight in a water feature?
In a pond or waterfall you need to be very careful with the placement of light. Even in the water, light can be blinding to someone who is looking into your pond. A good rule to follow is always place the light facing away from the viewing area.
In this picture the lights highlight aspects of the pond but are facing away from the main viewing area. These lights are small enough to be placed in the water and to be hidden within the rocks around the edge of the pond.
The amount of lights you use is completely up to you depending on how bright you want your water feature to be at night. If you have a lot of focal points that you want to highlight, use as many lights as needed to illuminate the area. You should want to focus on the main aspects of the water feature that draw the most interest.
For example, you would not want to place a light into a stream that is flat with not a lot of water movement. By placing the light on the falls of stream beds and waterfalls, you create a more visually interesting feature at night.
The shadows cast on buildings from the movement of water and light will create a very dynamic effect that will make a lasting impression.
Another tip for light placement is to stagger the lights throughout the landscape or area to create balance. The goal is to move the viewers eye through the entire space, using too much light in the foreground will prevent viewers from experiencing the entire water feature.
Do you have any other tips or questions on light placement? Post them below.
About the Author:
Jim has 26+ years of sales experience and 16+ years in the water garden industry